Overview
ANT transceiver module from Dynastream Innovations using CC2571, an 8 channel ANT network processor from Texas Instruments embedded with advanced ANT features, such as ANT-FS, AES data encryption, RSSI etc. An F antenna is integrated on the 20mm x 20mm x 2.6mm thin PCB board. Two models: ANTC782M4IB adn ANTC782M5IB
The module has been certified to comply with radio regulation or standards covering global markets that include North America, Europe, Japan, Australia and New Zealand. The RF certified module eases the burden for application and system developers from extensive RF and antenna design, and regulatory compliance testing, allowing for quicker time to the market. The module is ideal to build control or hub nodes of a wireless sensor network.
Find a Distributor Manufacturer's Product Page
Unique ANT Feature
Integrated ANT File Share (ANT-FS) functions for exchanging data records
Advanced Features
RSSI reporting
Maximum +4dBm transmission power
AES-128 data encryption on file transfers
High density node support – up to 300 nodes at 1 Hz Tx rate in same RF space
Frequency agility
Proximity search
Scanning mode – extremely low latency for asynchronous applications such as remote control
Low priority search – does not impact existing channels
Channel ID management – improves device pairing efficiency
Individual output power control per channel
Basic ANT Features
Up to 8 ANT channels
78 selectable RF channels (2403 to 2480MHz)
Simple sync/async serial interface
Integrated F antenna
On board 32.768 kHz crystal oscillator
Broadcast, acknowledged, or burst data transmissions
ANT channel combined message rate up to 200Hz (8 byte data payload)
Minimum message rate per ANT channel 0.5Hz
Burst transfer rates up to 20Kbps (true data throughput)
Up to 3 public, managed and/or private network keys
2.0V to 3.6V supply voltage range
-40°C to +85°C operating temperature
Low profile
Pin compatible with ANT AP2, AT3 and AP1 modules
RoHS compliant
Product Options
Target Use
Package
ANTC782M4IB
(REEL IS EOL)
For surface mount mass production
Tray: 20 modules on a tray
ANTC782M5IB
(EOL)
With Molex connector. For lab testing and development.
Tray: 20 modules on a tray
Evaluation of ANT as a practical Wireless Sensor Network solution
Evaluation of the ANT chip CC2570/CC2571 and the C7 modules
Design of ANT product prototypes and network demonstrations
Design of PC applications linking to ANT products and networks
The ANTC7EK1 kit consists of the following components:
4 x ANTC782M5IB modules
2 x battery boards
2 x EEPROM boards
2 x USB interface boards
2 x CR2032 coin cells
Registered dev kit owners receive direct ANT+ technical support from Dynastream Innovations.
Files and software tools listed below are directly associated with this component. For more resources, please click here .
1. Initial Setup
ANT Product
Select One
AP1 chip or module
AT3 chipset or module
AP2 chip or module
CC257x chip or module
nRF51422 SoC
nRF52832 SoC
Serial Mode
Select One
Asynchronous
Synchronous
Encyption Mode
Not Encrypted
Encrypted
Baud Rate4800 9600 19200 38400 50000 57600
Mode
Byte
Bit
2. Channel Data
Number of ChannelsSelect One 1 2 3 4 5 6 7 8
3. Battery Information
Typical Batteries
Select One
2032 Coin Cell
2430 Coin Cell
2450 Coin Cell
AAA Alkaline
AA Alkaline
9V Alkaline
Estimate
Results
Total Average Current: Base Current:
Battery Life in Days:
Channel
Rev. Data Type:
Average Current:
C7 Modules (EOL)
_180w.jpg "C7 Modules (EOL)")
The ANTC7EK1 kit offers a comprehensive set of ANT C7 modules, PC tools and resources to assist